Contact:

Email: mohanty@uoguelph.ca

Phone number: 519 824-4120 ext: 56664

Location: Bioproducts Development and Discovery Centre

Crop Science Building, Room 422 CRSC

 

Education:

B.Sc. Utkal University

M.Sc. Utkal University

Ph.D. Utkal University

 

Brief Bio:

Amar Mohanty is a Full Professor & Distinguished Research Excellence Chair in Sustainable Materials and the Director of the Bioproducts Discovery and Development Centre at the University of Guelph, Ontario, Canada. He is a former Michigan State University Professor. He currently holds a Adjunct Professor position at the State University of New York College of Environmental Science and Forestry, Syracuse, USA and a Visiting Professor status at the University of Portsmouth, UK.

Prof. Mohanty is an international leader in the field of sustainable materials, bioplastics, biocomposites and advanced biorefinery. His research focuses on engineering value-added uses of biomass wastes, waste plastics and industrial co-products from agro-food and biofuel industries. Circular bioeconomy, environmental sustainability, waste plastic valorization, biodegradable plastics as single-use plastic alternatives, biocarbon based composites and 3D printing of sustainable materials are other areas of his expertise.

Prof. Mohanty is the Editor-in-Chief of Sustainable Composites, Composites Part C -Open Access; an ELSEVIER journal.

He is a highly cited researcher with more than 850 publications to his credit, including 494 peer-reviewed journal papers, 70 patents (awarded/applied), 6 edited books, over 400 conference presentations, 25 book chapters. 

Prof. Mohanty is a Fellow of: (i) the Royal Society of Canada, (ii) the American Institute of Chemical Engineers, (iii) the Royal Society of Chemistry (UK), (iv) the Society of Plastic Engineers.

Prof. Mohanty has received many awards, including the (i) Miroslaw Romanowski Medal from the Royal Society of Canada (RSC), (ii) JL White Innovation Award from the international Polymer Processing Society (PPS), (iii) Synergy Award for Innovation from Natural Sciences and Engineering Research Council of Canada (NSERC), (iv) Andrew Chase Forest Products Division Award from the American Institute of Chemical Engineers (AIChE) and (v) the Lifetime Achievement Award from the BioEnvironmental Polymer Society (BEPS), USA.

International Affiliations

• Adjunct Professor, Department of Chemical Engineering, State University of New York, USA (2023 – 2026)
• Visiting Professor, Faculty of Engineering, Faculty of Engineering, University of Portsmouth, UK (2023 – 2026)

External Links:

Amar Mohanty | College of Engineering and Physical Sciences

Amar Mohanty | Plant Agriculture

 

Research Interests: 

• Sustainable Materials
• Bioeconomy and Circular Economy
• Light-weight sustainable composites for Automotive Parts
• Thermally Stable and Lightweight Electric Vehicle Parts with reduced to zero flammability
• Pyrolysis of waste biomass, Non-recyclable Waste Plastics and Biocarbon based Composites
• Biodegradable Plastics and Bioplastics
• Ecofriendly Flame Retardants
• Sustainable and Green Biodegradable Packaging
• Single-use Plastic Alternatives

 

Funded Graduate Opportunities available in my research group – M.Sc & PhD in Plant Agriculture

 

For entry in the M.Sc. program, candidates must hold a Bachelor's degree Science. 

 

If your first language is not English, you will be required to submit the results of a standardized language test. Please see the chart for acceptable tests and required scores. 

 

For more information on how to apply*, please contact me by e-mail: 

bddcjobs@uoguelph.ca(link sends e-mail) with a copy to mohanty@uoguelph.ca(link sends e-mail)

 

Applications will be accepted on an on-going basis until the positions are filled.

 

A preliminary selection will be made based on the interviews to qualify the prospective candidate to apply for graduate studies at the University of Guelph. Selection does not guarantee acceptance for graduate studies. 

 

*Only short-listed candidates will be contacted.

 

Click here for more details on these MSc opportunities with Dr. Mohanty.

 

Selected Publications: 

Jahangiri, F., Mohanty, A. K., & Misra, M. (2024). "Sustainable biodegradable coatings for food packaging: challenges and opportunities."Green Chem., Advance Article
Article Link: https://doi.org/10.1039/D3GC02647G

 

Hassan, M., Mohanty, A.K., & Misra,M. (2024). "Additive manufacturing of a super toughened biodegradable polymer blend: Structure–Property-Processing correlation and 3D printed prosthetic part development." ACS Appl. Polym. Mater. 2024, 6, 7, 3849–3863
Article Link: https://doi.org/10.1021/acsapm.3c03150

 

Weldekidan, H., Mohanty, A. K., Drzal, L. T., & Misra, M. (2024). "Graphene-containing biocarbon from burlap waste: property comparison with commercial grade graphene nanoplatelets." Carbon Trends, 15, 100336.
Article Link: https://doi.org/10.1016/j.cartre.2024.100336

 

Mohanty, A. K., Vivekanandhan, S., Das, O., M, R. M. L., Klinghoffer, N. B., Nzihou, A., & Misra, M. (2024)."Biocarbon materials." Nat Rev Methods Primers 4, 19 
Article Link: https://doi.org/10.1038/s43586-024-00297-4

 

Pesaranhajiabbas E, Mohanty AK, Al-Abdul-Wahid MS, Misra M. "A new approach for grafting plasticized cellulose acetate biodegradable plastic with maleic anhydride: Processing and characterization." SPE Polym. 2024; 1-11.
Article Link: http://doi.org/10.1002/pls2.10121

 

Hassan, M., Mohanty, A. K., & Misra, M. (2023). "3D Printing in Upcycling Plastic and Biomass Waste to Sustainable Polymer Blends and Composites: A Review". Materials & Design, 237, 112558.
Article Link:https://doi.org/10.1016/j.matdes.2023.112558

 

Itabana, B.E., Pal, A.K., Mohanty, A.K., Misra, M. (2023). “Biodegradable blown film composite from poly (butylene adipate-co-terephthalate) and talc: Effect of uniaxial stretching on mechanical and barrier properties”. Food Packaging and Shelf Life, 39, 101147.
Article Link: https://doi.org/10.1016/j.fpsl.2023.101147

 

Mohanty, A.K., Vivekanandhan, S., Tripathi, N., Roy, P., Snowdon, M., Drzal, L.T., Misra, M. (2023). “Sustainable Composites for Lightweight and Flame Retardant Parts for Electric Vehicles to Boost Climate Benefits: A Perspective”. Composites Part C: Open Access, 12, 100380.
Article Link: https://doi.org/10.1016/j.jcomc.2023.100380

 

Roy, P., Mohanty, A.K., Dick, P., Misra, M. (2023). "A review on challenges and choices for food waste valorization: Environmental and economic impacts".ACS Environmental Au, 3, 58-75.
Article Link: https://doi.org/10.1021/acsenvironau.2c00050

 

Mohanty, A.K., Wu, F., Mincheva, R., Hakkarainen, M., Raquez., JM., Mielewski, D.F., Narayan, R., Netravali, A.N., Misra, M. (2022). “Sustainable Polymers”.Nature Reviews Methods Primers, 2(1), 46.

Article Link: https://doi.org/10.1038/s43586-022-00124-8

 

Mohanty, A. K., Vivekanandhan, S., Pin, J. M., & Misra, M. (2018). Composites from renewable and sustainable resources: Challenges and innovations. Science, 362(6414), 536-542.

Article Link: https://www.science.org/doi/10.1126/science.aat9072

 

Relevant Files and Links: 

CURRICULUM VITAE (CV)

COMPLETE LIST OF PUBLICATIONS